Add the ZL1 1LE style to the rear of your Camaro with our 6th Gen ZL1 1LE rear wing! After months of R&D we have our version ready to ship out!
Our wing will add an aggressive race ready look to your Camaro as well as better aerodynamics over the factory spoiler.
The material is ABS plastic.
We suggest having the wing prepped and painted. Item is sent in primer finish. The wing is meant to be sanded and painted, not run in the primer finish.
Minor surface scratches may be present from shipping. These will easily be removed when sanded for paint.
Which Models Will It Fit?
This unit will bolt up to the 2016-2018 SS coupe and ZL1 coupe (will not bolt to convertibles without modifications) with the holes already drilled in the trunk lid. All hardware is included with the order for a simple bolt on installation.
For the 2019 model year it will bolt right up to 1SS models (non 1LE and 2SS due to camera).
All other models (1LE SS, RS etc.) will need to drill holes.
Our wing is the same height as the oem unit.
The side winglets are not attached prior to shipping. They will need to be attached with 3M VHB double sided tape (tape is included).
Strong plastic adhesive or screws can be used as well if you're not comfortable with the tape we include.
Our version includes our own JWM installation kit. This will include 3M adhesion promoter, 3M automotive VHB tape for the side winglets, instructions (emailed), and all installation hardware.
The installation kit of tape and adhesion promoter will ship separately from the wing.
These will be sent via email with the order invoice.
We guarantee fitment of the wing when installed IAW our installation instructions.
There is no other warranty offered or implied through JWM