We have always had our G2 Bilstein/Hyperco coil-over shock package,
but many of our customers wanted an adjustable shock, so we went to work
to make a first-class package just the way I would want it for a race
car without welding new mounts in place. This is what we came up with
and we did it with no compromises. There are other coil overs out there
but they are full of compromises. We did our best to avoid the
We have a spherical bearing set up on our shocks in all mounting
locations other than the bottom of the rear shock "Fork" mount. We did
this because of the precision that the bearing offers. Precise and
smooth operation that does not interfere with the shock function.
Spherical bearings are the best option for coil-over mounts. Rubber
mounts cause a "Trampoline" effect that must be overcome before the
shock can actually work. Rubber also changes the spring rate momentarily
until fully compressed. In addition, rubber causes side loads in the
shock rod and will eventually damage the shaft.
Plastic or Delrin eliminates the "rubber/trampoline" effect, but it
introduces new friction that interferes with the operation of the
shocks. Forces are forces and the friction involved in a Delrin/plastic
mounting system introduces "Hysteresis" losses that interfere with your
LG Motorsports famous GT2 coil overs, now for the C7 model Corvette including Grand Sport and Z06
- 12 way single adjustable front and rear shocks
- inverted shock mounting for less unsprung weight
- ride height adjustable at body and spring
- billet aluminum mounts
- spherical bearings at all pivot locations* (uses OEM rear lower arm mount)
- all hardware included
- bolt on design, no modifications required*
- Awesome complement to the LG G7 sway bar package
*Models with Magnetic Ride will require shock simulators.
Direct ship from manufacturer. Contact us for inventory status. International shipping contact us for a quote. Free shipping USA Only.